The AV6471 Optical Fiber Fusion Splicer is a new design of the welding machine equipment. The powerful features and very low loss to fully meet the fiber optic trunk and FTTx environment welding applications. Lightweight body and sleek design in the narrow working environment can deal with it smoothly; new optical imaging system and a pure digital design, the image shows more delicate, clear; real-time embedded operating system, to provide a friendly user interface and more rich set of features; built-in large capacity high-performance lithium battery, and provides reliable protection for a long time the field work; temperature, humidity and pressure of real-time compensation system so that the welding machine to adapt to change at any time, even in harsh environments, low fiber The losses continue. 


 Main features: 
 New design, pure digital welding machine 
 Small size, light weight, only 2.8kg with battery 
 High efficiency, 8 seconds 30 seconds of the welding, heating 
 Close the heated cover is automatically heated, turn off the automatic welding of windscreen 
 X and Y axes at the same time, fiber magnification of 304 times 
 Real-time discharge the correction system, generally do not need to adjust the parameters 
 Electrode, long life, can discharge up to 4000 times 
 USB and VGA port 
 5.7-inch digital high-definition LCD screen provide the perfect display 
 Real-time accurate screen display of remaining battery 
 Built-in large capacity lithium battery, to be completed by the 220 succeeding and heating 

 How it works: 
 The AV6471 Optical Fiber Fusion Splicer is a combination of optics, electronics and precision machinery, high-tech equipment. The principle is the use of optical imaging systems to extract the fiber image on the screen in real time, and the CPU, the fiber image to calculate the analysis given the data and message, and then control the fiber alignment system three-dimensional alignment of two optical fiber, then through the discharge electrode inspire the high temperature arc melting fiber in order to obtain low loss, low reflection, high mechanical strength and long-term stable and reliable fiber optic weld joints, and finally gives the precise loss assessment. 

 Typical applications: 
 Fiber Fusion Splicer design unit as the first, has over 20 years of welding machine research and development, user experience, we know that the various requirements of high-quality, high efficiency optical fiber splice. The AV6471 Optical Fiber Fusion Splicer is a compact design, simple operation, easy to carry fiber splicing equipment. The body design ergonomic principles of operation, even in a very short fiber can easily weld. 
 The AV6471 Optical Fiber Fusion Splicer can be used for the construction of the trunk, including all optical fiber cable line, line maintenance, emergency repair, production testing of fiber optic devices and research institutes, research and teaching. 

 Technical specifications: 
 Model AV6471 
 Applicable fibers SM (single mode), MM (multimode), DS (dispersion-shifted), on NZDS (non-zero dispersion-shifted) 
 Splice loss 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB (on NZDS) 
 Return loss better than 60dB 
 Automatic mode of operation, semi-automatic, manual 
 Fiber alignment of the PAS alignment 
 Fiber diameter of 80 ~ 150μm cladding diameter; coated with a diameter of 100 to 1000μm 
 Cutting length of 10 ~ 16mm (coated fiber diameter <250μm); 16mm (coated fiber diameter of 250 ~ 1000μm) 
 Magnification vertical dual display, magnified 304 times; level of dual display, zoom in 152 times 
 Image shows a high-performance 5.7-inch 640 * 480 LCD screen to provide clear, detailed images show 
 Interface provides a wealth of job information. 
 Tension testing standards 2N (optional) 
 Heat shrink tubing 60mm, 40mm and a range of heat shrink tubing 
 Battery capacity of a typical weld 220, the charging time is about 3.5 hours (charging) 
 The battery life charge cycles 300 to 500 times, customers themselves can be replaced 
 The battery indicator screen in real time accurately display the remaining battery 
 Typical of the electrode life is 4000 times, customers themselves can replace the electrode 
 Fiber jig new design, fiber orientation is more precise and convenient 
 Construction lighting, built-in high brightness, a wide range of lighting, which greatly facilitate night operations 
 The external interface provides a standard USB interface, and VGA video output port 
 Power supply built-in lithium battery 11.1V; an external adapter, Input: AC100-240V, Output: DC13.5V/4.5A 
 Working temperature: -10 ℃ ~ +50 ℃; Humidity: 95% RH (40 ° C, non-condensing); Altitude: 0 to 5000m 
 Dimensions L × W × H = 160 × 150 × 140 (mm) 
 Weight 2.3kg (without battery), 2.8kg (with battery)