Category: handheld stable light source Posted: 2011-10-08 14:58 
 Of ADS-310 can be single-mode fiber 1310nm or 1550nm single-mode single-wavelength measurements provide highly stable laser output. Equipped with a 10mW of 650nm red laser. 
 Portable fiber-optic dual-use and stable light source (single-mode single-wavelength laser light source & high-power red light) (ADS310 family) 

 - The ideal handheld optical network testing tool 

 The ADS-310 series of portable and stable light source, the use of advanced precision laser control technology, engineering, research and development, and equipment manufacturers to provide high-performance and stable laser source, with excellent cost-effective, high stability, reliability and security. 
 Handheld stable light source using a micro-processing hardware and software technologies with the current international advanced level. 
 Of ADS-310 can be single-mode fiber 1310nm or 1550nm single-mode single-wavelength measurements provide highly stable laser output. Equipped with a 10mW 650nm red laser, applicable to the measurement of single-mode or multimode fiber, they emit red light from the fiber to bend more serious position and the cover layer breakpoint or bare fibers at the injection can also be bad connections the joints injection, therefore, be able to identify light jumper, jumper plates, patch panels, joints, fault. The instrument optical network system engineering, installation, troubleshooting, maintenance and equipment R & D is an ideal tool. 
 In short, super-stable optical signal the ADS310 light to provide a single wavelength, used in conjunction with the Company ADM series optical power meter can be used to identify optical fiber, the ability to accurately measure the fiber loss, can help evaluate fiber link transmission quality, while one of these machines on the fiber can be seen searching the barrier function. 

 Features 

 - High stability light output from the 
 - In one machine, portable and practical. 
 - Can output continuous wave and modulated wave 
 - Large LCD display, backlit display and automatic power off function 
 - The use of lithium batteries or external power supply 
 - Low-voltage alarm function 
 - Rubber buttons feel good, reliable contact 
 - Shell molding of rubber and plastic one, suitable for field work 

 Range of applications 
 - Fiber optic communications equipment testing and maintenance, fiber optic devices, production and research 
 - Fiber-optic network testing and maintenance, integrated cabling system 

 Product parameters 
 Type the ADS-313 for ADS-315 
 Single-mode laser light source parameters 
 Wavelength of 1310 nm, 1550 nm 
 Output mode CW, 270Hz, 1KHz, 2KHz 
 Emitter Type FP-LD 
 Optical interface FC / PC 
 Spectral width ≤ 5nm 
 Output power ≥-7dBm 
 Stability ± 0.05dB/15min the 
 ± 0.10 dB/8hr 
 Red light source parameters 
 Wavelength (nm) 650 
 Output power ≥ 10mW 
 Detection distance ≥ 12Km 
 Optical interface 2.5mm Universal head + FC head 
 Use of multimode and singlemode fiber 
 10 minutes without operation automatically shut down the switch automatically shut down 
 Other parameters 
 Power supply 1000mAh lithium battery and power adapter 
 Battery life ≥ 20 hours 
 Operating Temperature 0 ℃ ~ 50 ℃ 
 Storage temperature -20 ℃ ~ 70 ℃ 
 Dimensions 185 × 80 × 45 (overall size) 
 Weight 400g (with battery) 



 Product Description: 
 ADS313: Single-mode 1310nm stabilized light source 10mW 650nm red light source dual-output 
 ADS315: single-mode 1550nm stable light 10mW 650nm red light source dual-output 

 Product configuration list: 
 Model ADS31X 
 Dual-purpose dual wavelength stable light source (one of rubber and plastic molding shell, supporting frames) 
 1 block of lithium-ion battery (1000mAh) 
 A power adapter 
 FC head a 
 Clean cotton swab to a package 
 An instrument manual 
 Quality assurance card 1 
 Portable soft pockets of Oxford (Messenger) a